Chigo Air Conditioners Error Codes

Modern CHIGO air conditioners have a developed self-diagnosis system, according to the results of which the control system, upon detection of a malfunction, blocks the operation of the entire device and at the same time reports the cause of the malfunction.

The CHIGO air conditioning control system reports any malfunctions by flashing the LED on the panel of the indoor unit. If one or another malfunction of the air conditioner is detected, the LEDs light or flash in a certain sequence, which corresponds to the detected error. If the control system of the air conditioner has detected more than one error, then the fault with the highest priority is displayed first, and then all the others.

The codes of malfunctions (errors) of CHIGO air conditioners are given in the table:

Error codes for wall split systems

Problems	Display	Display	LCD
Indoor unit	RUNNING LAMP	TAMER LAMP
Room temperature sensor	blinks 1 \ lights 8 sec	glows	E2
Evaporator Temperature Sensor	blinks 2 \ lights 8 sec	glows	E3
Air conditioner overheating	blinks 3 \ lights 8 sec	glows	E8
Pump (Overflow)	blinks 4 \ lights 8 sec	glows	E9
Fan motor	blinks 6 \ lights 8 sec	glows	E5
No communication with external unit	7 blinks / 8s	glows	E7
Lid not closed	glows	blinks 3 \ lights 8 sec	E0
Condenser temperature sensor	glows	blinks 4 \ lights 8 sec	E1
EEPROM does not work	glows	blinks 6 \ lights 8 sec	E6

For three-phase systems

Problems	Display	Display	LCD
External Block	RUNNING LAMP	TAMER LAMP
Outdoor temperature sensor	glows	blinks 1 \ lights 8 sec	E2
Pipe temperature sensor	glows	blinks 2 \ lights 8 sec	E3
Compressor overheating	glows	blinks 3 \ lights 8 sec	E7
	glows	blinks 4 \ lights 8 sec	E1
No inter-unit communication	glows	blinks 6 \ lights 8 sec	E6
	glows	7 blinks / 8s	E5

Indication of malfunctions of cassette conditioners

Error decoding	Indication
Defrost	blinks 1 time \ does not light up 1 second.
Frost protection	flashes 1 time \ does not light for 3 seconds.
Room temperature sensor	blinks 2 times \ does not glow for 4 seconds.
Pipe temperature sensor	flashes 3 times \ does not light up for 5 seconds.
Error from external unit	blinks 4 times \ does not light up for 6 seconds.
Block frost protection	blinks 5 times \ does not light up for 7 seconds.
Low pressure protection	blinks 6 times \ does not light up for 8 seconds.
Power Protection for External Unit	blinks 7 times \ does not light up for 9 seconds.
overheat protection	blinks 8 times \ does not light up 10 seconds.
Condensation overflow protection	flashes 9 times \ does not light for 11 seconds.

Indication of malfunctions of ducted air conditioners

Malfunction	Alarm Code
	E1
abnormal sensor temperature	E2
Room temperature sensor	E3
Error from external unit	E4
No inter-unit communication	E7
Overheat / frost protection	E8
	E9

Chigo: Error codes for columned air conditioners

Malfunction	Display
No inter-unit communication	E1
Room air temperature sensor	E2
Evaporator Temperature Sensor	E3
Low pressure protection	E4
Phasing error	E7
overheat protection	E8
Error from external unit	E9

Chigo: Fault codes for subceiling split systems

Malfunctions	Indication
Defrost mode	blinks 1 time \ does not light up 1 second.
Frost protection	blinks 1 time; does not light for 3 seconds.
Room temperature sensor	2 times blinks \ do not glow for 4 seconds.
Evaporator Temperature Sensor	3 times blinks / do not glow for 5 seconds.
Outdoor unit error	4 times blinks \ do not glow for 6 seconds.
Anti-freeze protection of indoor unit	blinks 5 times \ does not glow for 7 seconds.
Low Pressure Error	blinks 6 times \ does not glow for 8 seconds.
External unit power failure	blinks 7 times \ does not glow for 9 seconds.
overheat protection	blinks 8 times \ does not glow for 10 seconds.
Condensate overflow accident	blinks 9 times / does not light for 11 seconds.

Chigo: CMD intelligent vulti connected series

Malfunctions	Indication
Internal air temperature sensor	E2
Evaporator Temperature Sensor	E3
Error from external unit	E4
Fan motor failure	E5
Defrost mode	E6

Comments: 11

#11
NISHAN (Thursday, 20 April 2023 10:46)

H 4 ERROR CODE
#10
faru@bellsouth.net (Monday, 17 April 2023 20:03)

My Chigo a/c is on F5 and F7 errors, do I need to replace the electronic circuit to fix it, can you help me to locate a vendor
#9
Andrew (Friday, 07 October 2022 00:34)

Chico air conditioner 7.5kW.
FF fault.
Refrigerant is fine-not short, no blockage.
4wayvalve is fine
Pcb is fine.
WHAT OTHER ISSUES CAN FF FAULT REFER TO.
100 chigos purchased and about half have ff fault come up
#8
Tory Meyers (Wednesday, 12 January 2022 21:30)

My Chigo mini split keeps frosting over. I have had a HVAC person come by and check for Freon leaks and recharge the unit. It currently was working fine but is now frosted over again. I have noticed the heat indicator light keeps blinking where the fan turns off and on blowing warm air. I assume this is from it being frosted over. Any ideas on why this is happening. It goes into defrost mode but seems not to work
#7
Marius may (Thursday, 09 December 2021 13:19)

I would like to know what does it mean when a cassette type r22 aircon flashes defrost continuesly model CCA-24H
#6
Robert Lininger (Friday, 05 November 2021 14:21)

I have a split unit. The indoor unit blinks once every 1-2 seconds. I have no error code on my remote. What could the problem be
#5
Robert Lininger (Friday, 05 November 2021 13:59)

I have a split unit. The indoor unit blinks once every 1-2 seconds. I have no error code on my remote. What could the problem be
#4
Robert Lininger (Friday, 05 November 2021 13:58)

I have a split unit. The indoor unit blinks once every 1-2 seconds. I have no error code on my remote. What could the problem be
#3
Jannie Meyer (Wednesday, 09 June 2021 09:49)

My power indicator light on the internal unit flashes, what does this mean?
#2
hk2chimbala@gmail.com (Thursday, 22 October 2020 17:26)

Indoor working perfect later display reads F1
compressor not running not even harming
What is the solution
#1
Ken Esposito (Tuesday, 28 July 2020 18:01)

Light is blinking 4 times on indoor split unit. Its 90 ° outside with high humidity. Do I need freon recharge?